Vertiv
FacilityOS recognizes Vertiv equipment during a network scan and connects it over BACnet/IP, Modbus TCP, SNMP v3.
Region: United States · Category: Air side, Liquid cooling, Power
Product families
| Product families | Device types | Protocols | How it connects | |
|---|---|---|---|---|
| Liebert CW / DS / PDX / PCW (iCOM)CW114 · CW146 · CW181 · DS · PDX · PCW · DSE | CRAH, CRAC (DX), Fan wall | BACnet/IP · Modbus TCP · SNMP v3 | iCOM controller with an IntelliSlot Unity card (IS-UNITY-DP) | Point map available |
| Liebert XDU 450 / 1350XDU450 · XDU1350 · XDU070 | Coolant distribution unit | Modbus TCP · BACnet/IP · SNMP v3 | Built-in Modbus TCP / BACnet/IP | Point map available |
| Liebert EXL S1 / APM / APM2 / NXL / Trinergy / GXT5EXL S1 · APM · APM2 · NXL · Trinergy · GXT5 · eXL | UPS | SNMP v3 · Modbus TCP | IntelliSlot Unity card (IS-UNITY-DP): SNMPv3, Modbus TCP, BACnet/IP | Read-only Point map available |
| Liebert RPP / FPC / PPCRPP · FPC · PPC | PDU, Rack PDU | Modbus TCP · SNMP v3 | Distribution monitoring board, Modbus RTU/TCP or a Unity card | Point map available |
| Powerbar iMPB / Liebert PPCPowerbar iMPB · Liebert PPC | Overhead busway, PDU | Modbus TCP · SNMP v3 | RS-485 Modbus RTU; Modbus TCP on Ethernet models | To be confirmed |
| Liebert AFC / CW fan wallsLiebert AFC · Liebert CWA | Fan wall | BACnet/IP · Modbus TCP | Controller BACnet / Modbus (built in or with a card) | To be confirmed |
| Liebert STS2 / RDCLiebert STS2 · Liebert RDC | Static transfer switch | SNMP v3 · Modbus TCP | Unity card SNMP / Modbus, read-only | Read-only To be confirmed |
| NetSure DC power systemsNetSure 7100 · NetSure 8200 | -48 V DC power plant | SNMP v3 · Modbus TCP | NCU SNMP / Modbus | To be confirmed |
| Liebert CRV / SmartAisle / SN sensorsLiebert CRV · SmartAisle · SN-3C | In-row cooler, Aisle containment, Rack environment sensor | BACnet/IP · Modbus TCP · SNMP v3 | Unity card BACnet / Modbus / SNMP | To be confirmed |
To be confirmed Point map to be confirmed against the vendor's register list before use.
Read-only This family is always read-only in FacilityOS.
A brand that is not listed can still be connected if the device speaks one of the supported protocols: it starts from the generic protocol template and is adjusted to the vendor's point list.