Honeywell
FacilityOS recognizes Honeywell equipment during a network scan and connects it over BACnet/IP, OPC UA, Modbus TCP.
Region: United States · Category: Cleanroom, Air side, Process, Life safety, Heating, Gases & vacuum
Product families
| Product families | Device types | Protocols | How it connects | |
|---|---|---|---|---|
| Excel 5000 / Spyder / WEBs (CIPer)Excel 5000 · Spyder · CIPer 30 · CIPer 50 | Air handler, VAV zone, Fan coil unit, VAV air handler | BACnet/IP | BACnet/IP or MS/TP built in | To be confirmed |
| Experion PKS / ControlEdgeExperion PKS · ControlEdge PLC · C300 | Redundant controller CPU, Line controller (OEE) | OPC UA · Modbus TCP | OPC UA server / Modbus TCP | To be confirmed |
| INNCOM e7 / Deep MeshINNCOM e7 · Deep Mesh · e528 | Guest room control unit | BACnet/IP | INNcontrol BACnet gateway | To be confirmed |
| Enterprise Buildings Integrator (EBI) / ForgeEBI R610 · Forge | Cleanroom FMCS summary | OPC UA · BACnet/IP | OPC UA / BACnet | To be confirmed |
| Smart Valve / VBN / ML7984Smart Valve · VBN2 · ML7984 | Motorized valve | BACnet/IP · Modbus TCP | Controller BACnet / Modbus (built in or with a card) | To be confirmed |
| FAAST FLEX / FAAST LTFAAST FLEX · FAAST LT-200 | Aspirating smoke detector | Modbus TCP · BACnet/IP | Read-only through the vendor's BACnet / Modbus interface | Read-only To be confirmed |
| SOLA / 7800 SERIES burner controlsSOLA · RM7800 · S7999 | Hot-water boiler burner control | Modbus TCP | S7999 gateway Modbus, read-only | Read-only To be confirmed |
| VISTA-128BPT / Galaxy DimensionVISTA-128BPT · Galaxy Dimension | Intrusion alarm panel | Modbus TCP · BACnet/IP | Security platform BACnet / Modbus / MQTT interface, read-only | Read-only To be confirmed |
| Pro-Watch visitor / guard tourPro-Watch · WIN-PAK | Visitor management, Guard tour | BACnet/IP | Security platform BACnet / Modbus / MQTT interface, read-only | Read-only To be confirmed |
| Enraf SmartRadar / Entis ProSmartRadar FlexLine · Entis Pro | Tank farm level | Modbus TCP · OPC UA | Entis Pro Modbus / OPC UA, read-only | Read-only To be confirmed |
To be confirmed Point map to be confirmed against the vendor's register list before use.
Read-only This family is always read-only in FacilityOS.
A brand that is not listed can still be connected if the device speaks one of the supported protocols: it starts from the generic protocol template and is adjusted to the vendor's point list.