Socomec
FacilityOS recognizes Socomec equipment during a network scan and connects it over SNMP v3, Modbus TCP, Modbus RTU.
Region: Europe · Category: Power
Product families
| Product families | Device types | Protocols | How it connects | |
|---|---|---|---|---|
| MASTERYS / DELPHYS / MODULYSMASTERYS · DELPHYS · MODULYS | UPS | SNMP v3 · Modbus TCP | NET VISION card: SNMP, Modbus TCP | Read-only To be confirmed |
| DIRIS A / Digiware / COUNTISDIRIS A-40 · DIRIS A-60 · Digiware · COUNTIS E | Tenant submeter, Area energy meter, Main switchgear meter | Modbus TCP · Modbus RTU | RS-485 Modbus RTU; Modbus TCP on Ethernet models | To be confirmed |
| ATyS p / ATyS d / ATyS C55ATyS p M · ATyS d M · ATyS C55 | Transfer switch, Branch transfer switch | Modbus TCP · Modbus RTU | RS-485 Modbus, read-only | Read-only To be confirmed |
| STATYSSTATYS | Static transfer switch | Modbus TCP · SNMP v3 | Modbus / SNMP, read-only | Read-only To be confirmed |
| SUNSYS / DIRIS power factor correctionVARLOGIC · SUNSYS HES | Active harmonic filter (APF), Automatic capacitor bank, Power factor controller | Modbus TCP | Ethernet / RS-485 Modbus (target PF and mode writable with approval) | To be confirmed |
To be confirmed Point map to be confirmed against the vendor's register list before use.
Read-only This family is always read-only in FacilityOS.
A brand that is not listed can still be connected if the device speaks one of the supported protocols: it starts from the generic protocol template and is adjusted to the vendor's point list.