Renke
FacilityOS recognizes Renke equipment during a network scan and connects it over Modbus TCP, Modbus RTU, MQTT.
Region: China · Category: Air side, Cleanroom, Refrigeration, Medical systems, Process
Product families
| Product families | Device types | Protocols | How it connects | |
|---|---|---|---|---|
| IAQ sensorRS-WS-N01 · RS-CO2-N01 | IAQ sensor | Modbus TCP · Modbus RTU | RS-485 Modbus RTU; Modbus TCP on Ethernet models | To be confirmed |
| GMP environmental monitoring system / Temperature mapping set / Medical refrigerator / Medical freezer / Ultra-low freezer (−80°C) / Freezer (−20°C) / LN2 vapor-phase freezer / CO2 incubator / Cold room (2–8°C)RS-WS-WIFI | GMP environmental monitoring system, Temperature mapping set, Medical refrigerator, Medical freezer, Ultra-low freezer (−80°C), Freezer (−20°C), LN2 vapor-phase freezer, CO2 incubator, Cold room (2–8°C) | Modbus TCP · MQTT | RS-485 Modbus RTU; Modbus TCP on Ethernet models | Read-only To be confirmed |
To be confirmed Point map to be confirmed against the vendor's register list before use.
Read-only This family is always read-only in FacilityOS.
A brand that is not listed can still be connected if the device speaks one of the supported protocols: it starts from the generic protocol template and is adjusted to the vendor's point list.