nVent
FacilityOS recognizes nVent equipment during a network scan and connects it over Modbus TCP, SNMP v3, BACnet/IP.
Region: United States · Category: Liquid cooling, Life safety, Power, Air side
Product families
| Product families | Device types | Protocols | How it connects | |
|---|---|---|---|---|
| Liquid cooling CDUs / rear-doornVent CDU · RDHX | Coolant distribution unit | Modbus TCP · SNMP v3 | Ethernet Modbus TCP / SNMP | To be confirmed |
| TraceTek TTDM-128 / TTSIMTTDM-128 · TTSIM-2 · TT1000 | Leak detection, Leak detection cable | Modbus TCP · BACnet/IP | Modbus / BACnet, read-only | Read-only To be confirmed |
| ERICO SPD (TDS / TDX)TDS · TDX | Surge protective device (SPD) status | Modbus TCP | Remote contact | Read-only To be confirmed |
| RAYCHEM ElectroMelt / EMDR snow meltingElectroMelt · EMDR-10 | Snow-melt system | Modbus TCP · BACnet/IP | Controller BACnet / Modbus (built in or with a card) | To be confirmed |
To be confirmed Point map to be confirmed against the vendor's register list before use.
Read-only This family is always read-only in FacilityOS.
A brand that is not listed can still be connected if the device speaks one of the supported protocols: it starts from the generic protocol template and is adjusted to the vendor's point list.