Mitsubishi Electric
FacilityOS recognizes Mitsubishi Electric equipment during a network scan and connects it over SNMP v3, Modbus TCP, Modbus RTU, BACnet/IP, OPC UA.
Region: Japan · Category: Power, Cooling plant, Exhaust & abatement, Process, Materials handling, Air side
Product families
| Product families | Device types | Protocols | How it connects | |
|---|---|---|---|---|
| 9900 / 2033 series UPS9900D · 9900CX · 2033G | UPS | SNMP v3 · Modbus TCP | Network card: SNMP, Modbus TCP | Read-only To be confirmed |
| FR-F800 / FR-A800 / FR-E800FR-F800 · FR-A800 · FR-E800 · FR-F840 | Pump, Exhaust fan | Modbus TCP · Modbus RTU · BACnet/IP | Built-in RS-485 (Modbus / BACnet MS/TP); Modbus TCP on Ethernet models | To be confirmed |
| MELSEC iQ-R / iQ-F / QR04CPU · R08CPU · FX5U · Q03UDV | Redundant controller CPU | Modbus TCP · OPC UA | SLMP / Modbus TCP / OPC UA module | To be confirmed |
| NEXIEZ / ELENESSANEXIEZ · ELENESSA · NEXWAY | Elevator, Escalator | BACnet/IP · Modbus TCP | Read-only through the vendor's BACnet / Modbus gateway | Read-only To be confirmed |
| City Multi (AE-200 / BAC-HD150)City Multi · AE-200 · BAC-HD150 | VRF outdoor unit, VRF indoor unit, Split DX / condensing unit | BACnet/IP | AE-200 / BAC-HD150 BACnet gateway | To be confirmed |
To be confirmed Point map to be confirmed against the vendor's register list before use.
Read-only This family is always read-only in FacilityOS.
A brand that is not listed can still be connected if the device speaks one of the supported protocols: it starts from the generic protocol template and is adjusted to the vendor's point list.