Fire-Lite Alarms
FacilityOS recognizes Fire-Lite Alarms equipment during a network scan and connects it over Modbus TCP.
Region: United States · Category: Life safety
Product families
| Product families | Device types | Protocols | How it connects | |
|---|---|---|---|---|
| MS-9200UDLS / MS-9600UDLS · ES series (ES-50X / ES-200X)MS-9200UDLS · MS-9600UDLS · MS-9600LS · ES-50X · ES-200X | Fire alarm panel, Fire alarm zone & linkage, Fire detector (addressable point), Notification appliance circuit (NAC) | Modbus TCP | No published BACnet / Modbus gateway found: the panel's common fire / supervisory / trouble relays go to an IO module (read over Modbus), wired by a licensed fire contractor; or a third-party protocol converter reads its printer / serial port (to confirm) | Read-only To be confirmed |
To be confirmed Point map to be confirmed against the vendor's register list before use.
Read-only This family is always read-only in FacilityOS.
A brand that is not listed can still be connected if the device speaks one of the supported protocols: it starts from the generic protocol template and is adjusted to the vendor's point list.