Vaisala
FacilityOS recognizes Vaisala equipment during a network scan and connects it over Modbus TCP, Modbus RTU, BACnet/IP, OPC UA, DNP3.
Region: Europe · Category: Air side, Cleanroom, Refrigeration, Medical systems, Process, Power
Product families
| Product families | Device types | Protocols | How it connects | |
|---|---|---|---|---|
| HMT330 / DMT340 / GMP343 / viewLinc RFLHMT330 · DMT345 · GMP343 · HMP110 | IAQ sensor, Dry room, Temperature mapping set | Modbus TCP · Modbus RTU · BACnet/IP | RS-485 Modbus RTU; Modbus TCP on Ethernet models | To be confirmed |
| viewLinc continuous monitoring (RFL100 / DL4000)viewLinc 5.1 · RFL100 · DL4000 | GMP environmental monitoring system, Temperature mapping set, Medical refrigerator, Medical freezer, Ultra-low freezer (−80°C), Freezer (−20°C), LN2 vapor-phase freezer, CO2 incubator, GMP cleanroom | OPC UA · Modbus TCP | viewLinc OPC UA / Modbus | Read-only To be confirmed |
| OPT100 DGA / MHT410 moisture in oilOPT100 · MHT410 | Transformer DGA monitor | Modbus TCP · DNP3 | Monitor Modbus / IEC 61850 / DNP3, read-only | Read-only To be confirmed |
| WXT536 / AQT530 weather transmittersWXT536 · AQT530 | Weather station | Modbus TCP · Modbus RTU | RS-485 Modbus RTU; Modbus TCP on Ethernet models | To be confirmed |
To be confirmed Point map to be confirmed against the vendor's register list before use.
Read-only This family is always read-only in FacilityOS.
A brand that is not listed can still be connected if the device speaks one of the supported protocols: it starts from the generic protocol template and is adjusted to the vendor's point list.