Danfoss
FacilityOS recognizes Danfoss equipment during a network scan and connects it over Modbus TCP, Modbus RTU, BACnet/IP.
Region: Europe · Category: Cooling plant, Exhaust & abatement, Refrigeration, Air side, Heating, Power
Product families
| Product families | Device types | Protocols | How it connects | |
|---|---|---|---|---|
| VLT HVAC Drive FC 102 / AQUA FC 202FC 102 · FC102 · FC 202 · FC202 · FC 302 | Pump, Exhaust fan | Modbus TCP · Modbus RTU · BACnet/IP | Built-in Modbus RTU / BACnet MS/TP; Modbus TCP with the MCA 122 option | Point map available |
| AK-CC / AK-SM 800 / AK-PC refrigeration controlsAK-CC 550 · AK-SM 880 · AK-PC 781 | Refrigeration rack, Cold room (2–8°C), Cooler room, Freezer room | Modbus TCP · Modbus RTU · BACnet/IP | AK-SM system manager Modbus / BACnet | To be confirmed |
| AK-CC 55 / Optyma PlusAK-CC 55 · Optyma Plus | Cold room (2–8°C), Cooler room, Freezer room | Modbus TCP · Modbus RTU | RS-485 Modbus RTU; Modbus TCP on Ethernet models | To be confirmed |
| AB-QM 4.0 / NovoConAB-QM 4.0 · NovoCon S | Motorized valve | BACnet/IP · Modbus TCP | Controller BACnet / Modbus (built in or with a card) | To be confirmed |
| District heating substations (ECL Comfort)ECL Comfort 310 · Termix · VX Solo | Plate heat exchanger, District heating substation | Modbus TCP · BACnet/IP | ECL Comfort controller Modbus / BACnet | To be confirmed |
| Optyma iCO2 / Optyma SlimOptyma iCO2 · Optyma Slim Pack | Split DX / condensing unit | Modbus TCP | RS-485 Modbus RTU; Modbus TCP on Ethernet models | To be confirmed |
| VLT AHF 005 / 010, AAF 006, MCC 101 sine / dU/dt, VLT AFEAHF 005 · AHF 010 · AAF 006 · MCC 101 · VLT AFE | Passive (tuned) harmonic filter, Active harmonic filter (APF), Sine-wave filter, dv/dt filter, Active front end (AFE) drive | Modbus TCP | Ethernet / RS-485 Modbus (target PF and mode writable with approval) | To be confirmed |
To be confirmed Point map to be confirmed against the vendor's register list before use.
A brand that is not listed can still be connected if the device speaks one of the supported protocols: it starts from the generic protocol template and is adjusted to the vendor's point list.